Installation

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION ECU: INSTALLATION

INSTALLATION

1. INSTALL OCCUPANT CLASSIFICATION ECU





(a) Install the occupant classification ECU with the claw.

NOTICE :
- If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.
- When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with other parts and that it is not pinched between other parts.

(b) Connect the 2 connectors.
2. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

3. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK (for Manual Seat) Installation
4. INSTALL REAR SEAT TRACK COVER RH (for Manual Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

5. INSTALL FRONT INNER SEAT TRACK COVER RH (for Manual Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

6. INSTALL FRONT OUTER SEAT TRACK COVER RH (for Manual Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

7. INSTALL FRONT SEAT HEADREST ASSEMBLY RH (for Manual Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

8. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

9. INSTALL REAR INNER SEAT TRACK COVER RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

10. INSTALL REAR OUTER SEAT TRACK COVER RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

11. INSTALL FRONT INNER SEAT TRACK COVER RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

12. INSTALL FRONT OUTER SEAT TRACK COVER RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

13. INSTALL FRONT SEAT HEADREST ASSEMBLY RH (for Power Seat)
HINT: Use the same procedure for the RH side and the LH side Installation.

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for Manual Seat)
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. INSPECT FRONT SEAT ASSEMBLY (for Manual Seat) Installation
16. INSPECT FRONT SEAT ASSEMBLY (for Power Seat) Installation
17. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.