Removal

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
4. REMOVE STEERING PAD Removal
5. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Microphone)





(a) Disconnect the steering pad switch connector from the spiral cable.
(b) Remove the screw.
(c) Disengage the 2 pins and remove the steering pad switch.





(d) Remove the screw.
(e) Disengage the 2 pins and remove the steering pad switch assembly.
6. REMOVE STEERING PAD SWITCH LH (w/o Microphone)





(a) Disconnect the steering pad switch connector from the spiral cable.
(b) Remove the screw.
(c) Disengage the 2 pins and remove the steering pad switch LH.