DTC 5C-40

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: 5C-40: Camera Picture Error

DTC 5C-40 - Camera Picture Error

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - TELEVISION CAMERA)





(a) Disconnect the I7 navigation receiver assembly connector.
(b) Disconnect the V17 television camera assembly connector.
(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





(d) Reconnect the navigation receiver assembly connector.
(e) Reconnect the television camera assembly connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. INSPECT NAVIGATION RECEIVER ASSEMBLY (CA+ VOLTAGE)





(a) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY
OK -- REPLACE TELEVISION CAMERA ASSEMBLY