Reassembly

ENGINE HOOD / DOOR: HOOD: REASSEMBLY

REASSEMBLY

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY





(a) Tie the string inside the wire harness grommet to the hood lock control cable assembly.
(b) Using the string, fit the hood lock control cable assembly into the wire harness grommet.
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY





(a) Connect the hood lock control cable assembly.





(b) Engage the 2 claws and install the hood lock control lever sub-assembly.





3. INSTALL HOOD LOCK CONTROL CABLE PROTECTOR SUB-ASSEMBLY
(a) Install the hood lock control cable protector sub-assembly with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)





4. INSTALL WASHER NOZZLE SUB-ASSEMBLY
(a) Connect the washer hose.
(b) Engage the 2 claws and install the washer nozzle sub-assembly.
5. INSTALL HOOD SUPPORT





(a) Engage the 2 claws and install the hood stay holder.





(b) Install the grommet.
(c) Install the hood support.
6. INSTALL HOOD LOCK ASSEMBLY





(a) Connect the hood lock control cable assembly.





(b) Install the hood lock assembly with the 3 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
7. INSTALL NO. 2 HOOD LOCK RELEASE LEVER PROTECTOR Adjustments
8. INSTALL RADIATOR GRILLE Installation