Removal

1GR-FE EXHAUST: EXHAUST PIPE: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE HEATED OXYGEN SENSOR Removal
3. REMOVE EXHAUST PIPE ASSEMBLY CENTER
(a) Remove the 2 bolts and 2 compression springs, then separate the exhaust pipe center.
(b) Separate the 4 insulators from the exhaust tail pipe, then remove the exhaust pipe center.
4. REMOVE EXHAUST FRONT PIPE ASSEMBLY NO.2
(a) Remove the 2 bolts and 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust front pipe.
(b) Remove the 2 nuts, then separate the exhaust front pipe No. 2 from the exhaust manifold LH.
(c) Separate the insulator, then remove the exhaust front pipe No. 2.
5. REMOVE EXHAUST PIPE ASSEMBLY FRONT
(a) Remove the 2 nuts, then remove the exhaust front pipe.