Removal

1GR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER
(a) Remove the 2 nuts, then remove the V-bank cover.
4. REMOVE AIR CLEANER ASSEMBLY

(a) Disconnect the ventilation hose No. 2.

(b) Disconnect the vacuum hose.
(c) Disconnect the mass air flow meter connector.
(d) Remove the 2 wire harness clamps.

(e) Loosen the 2 hose clamps.
(f) Remove the 2 bolts, then remove the air cleaner.
5. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

(a) Disconnect the water by-pass hose No. 5.

(b) Disconnect the water by-pass hose No. 4.