DTC 80-10

NAVIGATION: NAVIGATION SYSTEM: 58-10,80-10: Gyro Error
80-10 - Gyro Error

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

(a) Enter the "Navigation Check" mode (Vehicle Sensors) Navigation Check Mode.





(b) Check the gyro voltage.

Standard voltage:

0.1 to 4.5 V

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal
OK -- Continue to next step.

2. CLEAR DTC

(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

NEXT -- Continue to next step.

3. RECHECK FOR DTC

(a) Recheck for DTCs and check if the same trouble occurs again.

HINT
If DTCs are detected frequently, replace the navigation receiver assembly.

OK:

Malfunction disappears.

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

OK -- END