Operation CHARM: Car repair manuals for everyone.

Turn Signal Flasher: Testing and Inspection





LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: INSPECTION

1. INSPECT TURN SIGNAL FLASHER ASSEMBLY

(a) Disconnect the D12 turn signal flasher assembly connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard voltage:





(c) If the result is not as specified, there is a malfunction on the wire harness side.

(d) Measure the resistance according to the value(s) in the table below.

Standard resistance:





(e) If the result is not as specified, there is a malfunction on the wire harness side.

(f) Reconnect the D12 turn signal flasher assembly connector.





(g) Measure the voltage according to the value(s) in the table below.

Standard voltage:





(h) If the result is not as specified, replace the turn signal flasher assembly.