Removal

2GR-FE FUEL: FUEL INJECTOR: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

HINT
Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

3. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

4. REMOVE NO. 1 ENGINE UNDER COVER Removal

5. DRAIN ENGINE COOLANT Service and Repair

6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

10. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

11. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

13. DISCONNECT ENGINE ROOM MAIN WIRE Removal

14. REMOVE THROTTLE BODY BRACKET Removal

15. REMOVE NO. 1 SURGE TANK STAY Removal

16. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

17. DISCONNECT FUEL TUBE SUB-ASSEMBLY Removal

18. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY Removal

19. REMOVE FUEL INJECTOR ASSEMBLY

(a) Pull out the fuel injectors from the fuel delivery pipe.





NOTICE:
If the injectors are to be reused, reinstall them to the same cylinder they came from.

(b) Remove the 6 O-rings from the injectors.