Removal

2GR-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY Removal

2. REMOVE NO. 1 ENGINE UNDER COVER Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

9. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

11. REMOVE THROTTLE BODY

(a) Disconnect the throttle body connector and clamp.

(b) Disconnect the 2 water by-pass hoses from the throttle body.

(d) Remove the throttle body gasket from the intake air surge tank.