Removal

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

4. REMOVE STEERING PAD Removal

5. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display)

(a) Disconnect the steering pad switch connector from the spiral cable.





(b) Remove the screw.

(c) Disengage the 2 pins and remove the steering pad switch.

(d) Remove the screw.





(e) Disengage the 2 pins and remove the steering pad switch assembly.

6. REMOVE STEERING PAD SWITCH LH (w/o Multi-information Display)

(a) Disconnect the steering pad switch connector from the spiral cable.





(b) Remove the screw.

(c) Disengage the 2 pins and remove the steering pad switch LH.