Sound Signal Circuit Between Multi-media Interface ECU and Stereo Jack Adapter

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter
- Sound Signal Circuit between Multi-media Interface ECU and Stereo Jack Adapter

DESCRIPTION

The No. 2 stereo jack adapter assembly sends the sound data signal from an external device to the multimedia interface ECU through this circuit.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (STEREO JACK ADAPTER - MULTI-MEDIA INTERFACE ECU)

(a) Disconnect the G27 multi-media interface ECU connector.

(b) Disconnect the G26 No. 2 stereo jack adapter assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures