Stereo Component Tuner Power Source Circuit

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Stereo Component Tuner Power Source Circuit
- Stereo Component Tuner Power Source Circuit

DESCRIPTION

This is the power source circuit to operate the stereo component tuner assembly.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT TUNER - BATTERY AND BODY GROUND)

(a) Disconnect the G24 stereo component tuner assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures