Removal

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH Removal

3. REMOVE COWL SIDE TRIM BOARD RH Removal

4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

6. REMOVE LOWER INSTRUMENT COVER LH Removal

7. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Removal

8. REMOVE INSTRUMENT PANEL BOX DOOR COVER Removal

9. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal

10. REMOVE DCM (TELEMATICS TRANSCEIVER)

(a) Disconnect the connectors.

(b) Remove the bolt, nut and DCM (telematics transceiver) with bracket from the vehicle.





11. REMOVE MAYDAY BATTERY WITH BRACKET

(a) Remove the bolt.





(b) Detach the 2 claws and remove the mayday battery with bracket.

12. REMOVE NO. 1 TELEPHONE BRACKET

(a) Disconnect the 2 connectors.





(b) Remove the 3 bolts and No. 1 telephone bracket.

13. REMOVE NO. 2 TELEPHONE BRACKET

(a) Remove the 2 bolts and No. 2 telephone bracket.