Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH Disassembly

3. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH Disassembly

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH Disassembly

6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY Removal

7. REMOVE FRONT DOOR SERVICE HOLE COVER LH Disassembly

8. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH Disassembly

9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH Disassembly

10. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and power window regulator motor.









Text in Illustration





CAUTION:
Do not place your finger, etc. within the range of movement of the window regulator. When removing the power window regulator motor, the force of the spring causes the window regulator to move in the direction of the arrow shown in the illustration (the direction in which the window rises), which may cause injury.

NOTICE:
Be careful when removing the screws as the motor may fall and become damaged.