Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Rear Door): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH Disassembly

3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH Disassembly

4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH Disassembly

5. REMOVE REAR SPEAKER ASSEMBLY Removal

6. REMOVE REAR DOOR SERVICE HOLE COVER LH Disassembly

7. REMOVE REAR DOOR GLASS RUN LH Disassembly

8. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY LH Disassembly

9. REMOVE REAR DOOR QUARTER WINDOW GLASS LH Disassembly

10. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH Disassembly

11. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY LH Disassembly

12. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and power window regulator motor.