Disassembly

INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (for 1GR-FE): DISASSEMBLY

1. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY





(a) Remove the 6 screws and console compartment door.

2. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY





(a) Remove the 2 screws and console compartment door lock.





Remove the 4 screws.

(b) Using a screwdriver, detach the 6 claws and remove the console compartment inner door.

HINT
Tape the screwdriver tip before use.

Text in Illustration









Remove the 4 screws and console compartment door hinge.

3. REMOVE REAR CONSOLE END PANEL





(a) Detach the 4 clips and 4 claws and remove the rear console end panel.

4. REMOVE CONSOLE BOX REGISTER ASSEMBLY





(a) Detach the 4 claws and remove the console box register.

5. REMOVE CONSOLE CUP HOLDER BOX





(a) Remove the 6 screws and console cup holder.

6. REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY Removal

7. REMOVE SWITCH BASE





(a) Remove the 2 screws and switch base.

8. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for VF2A)





(a) Detach the 6 claws and remove the shifting hole cover.

9. REMOVE FRONT UPPER CONSOLE PANEL GARNISH





(a) for VF2A:

(1) Detach the 6 claws and remove the front upper console panel garnish.

Text in Illustration





(b) for 2WD, for VF4BM:

(1) Detach the 10 claws and remove the front upper console panel garnish.





Text in Illustration





10. REMOVE NO. 2 BOX BOTTOM MAT (for 2WD)





(a) Detach the 4 claws and remove the No. 2 box bottom mat.

11. REMOVE TRANSFER POSITION SWITCH (for VF4BM) Removal