Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER EXTENSION LH

(a) Install the front bumper extension with the 4 nuts.

Torque : 65 Nm (665 kgf-cm, 48 ft-lbf)

2. INSTALL FRONT BUMPER EXTENSION RH

HINT
Use the same procedure as for the LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT

(a) Install the front bumper reinforcement with the 4 nuts.

Torque : 65 Nm (665 kgf-cm, 48 ft-lbf)

4. INSTALL FRONT BUMPER UPPER RETAINER

(a) Engage the 2 hooks and install the front bumper upper retainer.

(b) Tighten the 3 bolts.

Torque : 8.0 Nm (80 kgf-cm, 71 in-lbf)

5. INSTALL FRONT BUMPER FILLER LH

(a) Engage the clip and the 2 claws and install the front bumper filler.

6. INSTALL FRONT BUMPER FILLER RH

HINT
Use the same procedure as for the LH side.

7. INSTALL FRONT BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws and install the front bumper side support.

(b) Tighten the 2 screws.

Torque : 3.0 Nm (30 kgf-cm, 27 in-lbf)

8. INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT
Use the same procedure as for the LH side.

9. INSTALL FRONT BUMPER COVER

(a) Install the 4 clips.

(b) Engage the 2 claws and install the front bumper cover.

Torque : 3.0 Nm (30 kgf-cm, 27 in-lbf) for screw

Torque : 8.0 Nm (80 kgf-cm, 71 in-lbf) for bolt

(d) Install the 5 clips.

(e) Remove the protective tape.

10. INSTALL RADIATOR GRILLE

(a) Engage the 5 clips and install the radiator grille.

(b) Tighten the 2 screws.

Torque : 3.0 Nm (30 kgf-cm, 27 in-lbf)

(c) Install the 2 clips.