Removal

ENGINE HOOD / DOOR: HOOD SUPPORT: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the LH side.

1. REMOVE HOOD SUPPORT





(a) Using a screwdriver with its tip wrapped in protective tape, remove the 2 stop rings and the hood support.

NOTICE:
* Do not touch the rod of the hood support with gloves, to avoid fibers from adhering.
* When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.

HINT
Support the hood by hand while removing the hood support.