Operation CHARM: Car repair manuals for everyone.

Removal





INTERIOR: ROOF HEADLINING: REMOVAL

1. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH Removal

2. REMOVE REAR SEATBACK ASSEMBLY RH Removal

3. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH Removal

4. REMOVE REAR SEATBACK ASSEMBLY LH Removal

5. REMOVE REAR FLOOR BOARD

(a) Remove the bolt and the luggage hold belt striker.





Text in Illustration





HINT
Use the same procedure for both sides.

(b) Disengage the clip and the claw and remove the rear floor board.





6. REMOVE REAR FLOOR MAT SUPPORT PLATE

(a) Remove the 5 screws.





(b) Disengage the 11 claws and remove the rear floor mat support plate.





7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Remove the cap.

(b) Remove the bolt and the luggage hold belt striker.

8. REMOVE REAR FLOOR MAT ASSEMBLY

(a) Using a clip remover, remove the 2 clips and the rear floor mat.





9. REMOVE FRONT DOOR SCUFF PLATE RH

(a) Disengage the 14 claws and remove the front door scuff plate.





10. REMOVE FRONT DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side.

11. REMOVE ACCESS DOOR SCUFF PLATE RH

(a) Disengage the 6 claws and remove the access door scuff plate.





12. REMOVE ACCESS DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side.

13. REMOVE FRONT FLOOR FOOTREST Removal

14. REMOVE FOOTREST CLIP Removal

15. REMOVE COWL SIDE TRIM BOARD RH

(a) Remove the clip.





(b) Disengage the 2 claws and remove the cowl side trim board.

16. REMOVE COWL SIDE TRIM BOARD LH

HINT
Use the same procedure as for the RH side.

17. REMOVE ROOF SIDE INNER GARNISH COVER RH

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the roof side inner garnish cover.

18. REMOVE ROOF SIDE INNER GARNISH COVER LH

HINT
Use the same procedure as for the RH side.

19. REMOVE ROOF SIDE RAIL GARNISH RH

(a) Remove the 2 bolts.





(b) Disengage the claw and the guide remove the roof side rail garnish.

20. REMOVE ROOF SIDE RAIL GARNISH LH

HINT
Use the same procedure as for the RH side.

21. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Remove the front door opening trim weatherstrip.





22. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT
Use the same procedure as for the RH side.

23. REMOVE ASSIST GRIP PLUG

HINT
Use the same procedure to remove all the assist grip plugs.





Text in Illustration





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip plug.

24. REMOVE ASSIST GRIP ASSEMBLY

HINT
Use the same procedure to remove all the assist grips.





Text in Illustration





(a) Remove the 2 screws and the assist grip.

25. REMOVE VISOR SUB-ASSEMBLY RH

(a) Disengage the 2 claws and remove the visor sub-assembly.





Text in Illustration





26. REMOVE VISOR SUB-ASSEMBLY LH

HINT
Use the same procedure as for the RH side.

27. REMOVE FRONT PILLAR GARNISH RH

(a) Disengage the 2 clips and the guide and remove the front pillar garnish.





28. REMOVE FRONT PILLAR GARNISH LH

HINT
Use the same procedure as for the RH side.

29. REMOVE DECK SIDE GARNISH (w/ Woofer)

(a) Disengage the 6 claws and remove the rear deck side garnish.





30. REMOVE SPEAKER MOUNTING COVER (w/ Woofer) Removal

31. REMOVE AMPLIFIER BOX SPEAKER ASSEMBLY (w/ Woofer) Removal

32. REMOVE PACKAGE HOLDER NET HOOK

HINT
Use the same procedure to remove all the package holder net hooks.





Text in Illustration





(a) Remove the screw and the package holder net hook.

33. REMOVE QUARTER TRIM POCKET TRAY (w/o Woofer)

(a) Disengage the 7 claws and remove the quarter trim pocket tray.





34. REMOVE SIDE TRIM COVER (w/o Woofer)

(a) Disengage the 6 claws and the 2 guides remove the side trim cover.





35. REMOVE QUARTER TRIM POCKET (w/o Woofer)

(a) Disengage the 6 claws and remove the quarter trim pocket.





36. REMOVE LAP BELT OUTER ANCHOR COVER

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Disengage the 3 claws and remove the lap belt outer anchor cover.

37. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH

(a) Remove the bolt and the anchor plate.





38. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH

HINT
Use the same procedure as for the RH side.

39. REMOVE REAR DECK TRIM COVER (w/ Power Outlet Socket)

(a) Disengage the 8 claws and remove the rear deck trim cover.





(b) Disconnect the power outlet connector.





40. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

(a) Remove the 3 screws and bolt.





(b) Disengage the 6 clips and the 8 claws and remove the deck trim side panel.





41. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

(a) Remove the 3 screws.





(b) Disengage the 6 clips and the 8 claws and remove the deck trim side panel.





42. REMOVE ROOF SIDE INNER GARNISH RH

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.





Text in Illustration





(b) Remove the bolt and the clip.





(c) Disengage the 7 clips and the guide and remove the roof side inner garnish.

(d) Pass the rear seat outer belt through the slit in the roof side inner garnish.

43. REMOVE ROOF SIDE INNER GARNISH LH

HINT
Use the same procedure as for the RH side.

44. REMOVE ROOF HEADLINING HOLE PLUG

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and open the cover.

(b) Remove the bolt.





Text in Illustration





(c) Disengage the claw and remove the roof headlining hole plug.

45. REMOVE COAT HOOK

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.

(b) Remove the bolt and the coat hook.





Text in Illustration





46. REMOVE VISOR ASSEMBLY RH

(a) Remove the visor support shaft from the visor holder.





(b) Remove the 2 screws and the visor.

47. REMOVE VISOR ASSEMBLY LH

HINT
Use the same procedure as for the RH side.

48. REMOVE VISOR HOLDER

HINT
Use the same procedure for both sides.





Text in Illustration





(a) Disengage the 2 claws by turning the visor counterclockwise between 60 to 120° and remove the visor holder.

HINT
The claw may be damaged during removal. However, it is reusable because this does not effect its function.

49. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

Removal

50. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

Removal

51. REMOVE ROOM LIGHT ASSEMBLY

HINT
The procedure described below is for the front side. Use the same procedure for both the front and rear sides, unless otherwise specified.





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.





Text in Illustration





(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light.





Text in Illustration





(c) for Front Side:





Text in Illustration





(1) Remove the 2 wire harnesses from the 2 claws of the room light.

(2) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.

(d) for Rear Side:





Text in Illustration





(1) Remove the wire harness from the claw of the room light.

(2) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.

52. REMOVE NO. 1 PERSONAL LIGHT LENS Removal

53. REMOVE NO. 2 PERSONAL LIGHT LENS Removal

54. REMOVE PERSONAL LIGHT ASSEMBLY Removal

55. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

56. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

57. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL SUB-ASSEMBLY Removal

58. REMOVE ROOF HEADLINING

(a) Remove the wire harness from the 2 clamps.





(b) Disconnect the 2 connectors.

(c) Using a clip remover, remove the clamp.

(d) Using a clip remover, remove the 4 clamps.





(e) w/ Satellite Radio:

(1) Using a clip remover, remove the clamp and the antenna cord connector.





(2) Disconnect the antenna cord connector.





(f) Using a clip remover, remove the 4 clips.





(g) Remove the roof headlining from the back door.