Removal

DOOR LOCK: BACK DOOR LOCK: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE BACK DOOR TRIM COVER RH Disassembly

3. REMOVE BACK DOOR TRIM COVER LH

HINT
Use the same procedure as for the RH side.

4. REMOVE DOOR TRIM RETAINER CAP Disassembly

5. REMOVE BACK DOOR TRIM BOARD Disassembly

6. REMOVE BACK DOOR SERVICE HOLE COVER Disassembly

7. REMOVE BACK DOOR LOCK

(a) Disconnect the back door lock rod as shown in the illustration.





(b) Disconnect the connector.

(c) Loosen bolt A.





(d) Using "Torx" socket wrench T30, remove the 3 screws and the back door lock.

NOTICE:
Do not drop or damage the back door lock when removing the screws.

HINT
Remove the back door lock through the service hole.

8. REMOVE BACK DOOR LOCK CYLINDER

(a) Disconnect the connector and the 2 clamps, then remove the retainer.





(b) Remove the back door lock cylinder.