Removal

BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR: REMOVAL

1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY Removal

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) Removal

4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Removal

5. REMOVE YAW RATE AND DECELERATION SENSOR (for Automatic Transmission)





(a) Disengage the clamp from the sensor bracket.

(b) Disconnect the yaw rate and deceleration sensor connector.

(c) Remove the 2 bolts and the yaw rate and deceleration sensor.

6. REMOVE YAW RATE AND DECELERATION SENSOR (for Manual Transmission)





(a) Disconnect the yaw rate and deceleration sensor connector.

(b) Remove the 2 bolts and the yaw rate and deceleration sensor.