Installation

SEAT: REAR SEAT ASSEMBLY (for RH Side): INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY

(a) Engage the hook and temporarily install the rear seatback with the 2 bolts.





(b) Tighten the 2 bolts in the sequence shown in the illustration.

Torque : 37 Nm (375 kgf-cm, 27 ft-lbf)

(c) Pull up the rear seatback.

(d) Install the rear seat inner belt into the rear seatback holder.





Text in Illustration





(e) Install the anchor plate of the rear center seat outer belt with the bolt.

Torque : 42 Nm (430 kgf-cm, 31 ft-lbf)

NOTICE:
Do not place the anchor plate over the convex area of the rear seat inner belt.

2. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

(a) Pull the rear seatback lock release button and tilt the rear seatback forward.

(b) Engage the 10 clips and install the rear seatback board carpet.

(c) Pull up the rear seatback.

3. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Insert the locating pin into the body hole.





(b) Temporarily install the rear seat cushion with the 2 bolts.

(c) Tighten the 2 bolts in the sequence shown in the illustration.

Torque : 37 Nm (375 kgf-cm, 27 ft-lbf)