Removal

WINDSHIELD / WINDOW GLASS: POWER WINDOW REGULATOR MOTOR: REMOVAL

HINT
* Use the same procedure for both the RH and LH sides.
* The procedure described below is for the RH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT ARMREST BASE UPPER PANEL Disassembly

3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

4. REMOVE FRONT NO. 2 DOOR SERVICE HOLE COVER Disassembly

5. REMOVE OUTER REAR VIEW MIRROR Removal

6. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY Removal

7. REMOVE FRONT NO. 1 SPEAKER Removal

8. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

9. REMOVE FRONT DOOR INSIDE PANEL PLATE Disassembly

10. REMOVE FRONT DOOR CHECK ASSEMBLY Disassembly

11. REMOVE FRONT DOOR WEATHERSTRIP Disassembly

12. REMOVE FRONT DOOR GLASS RUN Disassembly

13. REMOVE FRONT DOOR FRAME SUB-ASSEMBLY FRONT LOWER Disassembly

14. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

15. REMOVE FRONT DOOR WINDOW FRAME REAR LOWER Disassembly

16. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

17. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Disassembly

18. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using "Torx" socket wrench T25, remove the 3 screws and the power window regulator motor.