Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect each fog light connector, and then install the front bumper assembly.

(b) Engage the 5 claws.





HINT
Use the same procedure for the RH side and LH side.

(c) Install the 3 clips and 8 screws.

(d) Install the screw and pin hold clip.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. ADJUST FOG LIGHT AIMING (w/ Fog Light)

Adjustments