Removal

2GR-FE STARTING: STARTER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE BATTERY Removal

3. REMOVE NO. 2 AIR CLEANER INLET Removal

4. REMOVE NO. 1 AIR CLEANER INLET Removal

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER BRACKET





(a) Remove the 2 bolts and bracket.

8. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Open the terminal cap, remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.