Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Connect the 2 fog light connectors.

(b) Engage the 5 claws to install the front bumper cover as shown in the illustration.





HINT
Use the same procedure for the RH and LH sides.

(c) Install the 3 clips and 6 screws.





(d) Install the 2 pin hold clips and screw.





Torque : 2.1 Nm (21 kgf-cm, 19 in-lbf)

HINT
Use the same procedure for the RH and LH sides.

2. INSTALL RADIATOR GRILLE Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments

5. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

6. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments

7. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments