Removal

EXTERIOR: FRONT BUMPER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE RADIATOR GRILLE Removal

3. REMOVE FRONT BUMPER COVER

(a) Put protective tape around the front bumper cover.





(b) Using a screwdriver, turn the 2 pin hold clips 90° and remove the them and the screw.

HINT
Use the same procedure for the RH and LH sides.

(c) Remove the 6 screws and 3 clips.





(d) Disengage the 5 claws and pull the front bumper cover in the direction shown in the illustration.





HINT
Use the same procedure for the RH and LH sides.

(e) Disconnect the 2 fog light connectors and remove the front bumper cover.