Removal

ENGINE HOOD / DOOR: POWER BACK DOOR DRIVE UNIT: REMOVAL

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER ASSEMBLY Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR DOOR SCUFF PLATE LH Removal

5. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

6. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

7. REMOVE NO. 2 DECK BOARD Removal

8. REMOVE NO. 1 DECK BOARD Removal

9. REMOVE JACK CARRIER SUPPORT Removal

10. REMOVE JACK CARRIER CUSHION Removal

11. REMOVE JACK ASSEMBLY Removal

12. REMOVE JACK CARRIER ASSEMBLY Removal

13. REMOVE DECK SIDE TRIM BOX RH Removal

14. REMOVE REAR MAT Removal

15. REMOVE REAR DECK FLOOR BOX Removal

16. DISCONNECT REAR NO. 2 OUTER SEAT BELT ASSEMBLY LH Removal

17. DISCONNECT REAR NO. 2 OUTER SEAT BELT ASSEMBLY RH Removal

18. REMOVE CENTER SUB SEAT CUSHION COVER SUB-ASSEMBLY

19. REMOVE REAR NO. 2 SEAT ASSEMBLY Removal

20. REMOVE REAR FLOOR FINISH PLATE Removal

21. REMOVE DECK SIDE TRIM COVER LH Removal

22. REMOVE DECK SIDE TRIM LH Removal

23. REMOVE SIDE TRIM COVER LH (w/o Rear Seat Entertainment System) Removal

24. REMOVE POWER OUTLET SOCKET BEZEL (w/ Rear Seat Entertainment System) Removal

25. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH Removal

26. REMOVE REAR POWER POINT SOCKET ASSEMBLY Removal

27. REMOVE REAR POWER OUTLET SOCKET COVER Removal

28. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH Removal

29. REMOVE ROPE HOOK ASSEMBLY Removal

30. REMOVE NO. 2 DECK SIDE TRIM HOOK Removal

31. REMOVE FRONT DECK SIDE TRIM COVER LH Removal

32. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH Removal

33. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

34. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

35. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY Disassembly

36. REMOVE BACK DOOR SERVICE HOLE COVER LH Disassembly

37. REMOVE BACK DOOR MOTOR UNIT

(a) Disconnect the power back door rod and remove the back door stay plate.

(b) Disconnect the connector.