How To Proceed With Troubleshooting

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System): HOW TO PROCEED WITH TROUBLESHOOTING

HINT
The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock control system is operating normally. Check the power door lock control system first before troubleshooting the wireless door lock control system.

Use this procedure to troubleshoot the wireless door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer to confirm the trouble How To Proceed With Troubleshooting.

NEXT -- Continue to next step.

3. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM

(a) Use the Techstream to check for normal function of the CAN communication system.

Result





B -- Go to CAN COMMUNICATION SYSTEM Diagnosis System
A -- Continue to next step.

4. DTC CHECK

(a) Check for a DTC and note any codes that are output.

(b) Delete the DTC.

(c) Recheck for DTCs. Try to prompt the DTC by simulating the original symptom that the DTC suggests.

Result





B -- GO TO DTC CHECK/CLEAR Wireless Door Lock Control System (w/ Smart Key System)
A -- Continue to next step.

5. SYMPTOM SIMULATION

NEXT -- Continue to next step.

6. PROBLEM SYMPTOMS TABLE

(a) If the fault is not listed in the problem symptoms table, proceed to A.

(b) If the fault is listed in the problem symptoms table, proceed to B.

B -- Go to step 8
A -- Continue to next step.

7. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM

(a) Terminals of ECU Wireless Door Lock Control System (w/ Smart Key System)

(b) DATA LIST/ACTIVE TEST Wireless Door Lock Control System (w/ Smart Key System)

NEXT -- Continue to next step.

8. ADJUST, REPAIR OR REPLACE

NEXT -- Continue to next step.

9. CONFIRMATION TEST

NEXT -- END