Installation

SUPPLEMENTAL RESTRAINT SYSTEM: OCCUPANT CLASSIFICATION ECU: INSTALLATION

1. INSTALL OCCUPANT CLASSIFICATION ECU

(a) Install the occupant classification ECU with the claw.





NOTICE:
* If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.
* When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with other parts and that it is not pinched between other parts.

(b) Connect the 2 connectors.

2. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat)

(a) Install the front seat assembly RH (for manual seat) Installation.

3. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)

(a) Install the front seat assembly RH (for power seat) Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL BATTERY SERVICE HOLE COVER ASSEMBLY Installation

6. INSTALL DECK BOARD ASSEMBLY Installation

7. INSPECT FRONT SEAT ASSEMBLY (for Power Seat) Installation

8. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.