Removal

WIPER AND WASHER: FRONT WIPER MOTOR: REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

(a) Remove the nut, and the front wiper arm and blade assembly LH.





2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

(a) Remove the nut, and the front wiper arm and blade assembly RH.





3. REMOVE HOOD TO COWL TOP SEAL

(a) Disengage the 8 clips and remove the hood to cowl top seal.





4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

(a) Disengage the 2 claws and disconnect the front fender to cowl side seal LH.





(b) Disengage the 2 claws and disconnect the front fender to cowl side seal RH.





(c) Remove the 2 clips.





(d) Disengage the 20 claws and remove the cowl top ventilator louver sub-assembly.

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts and the windshield wiper motor and link assembly.

6. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY

(a) Using a screwdriver with the tip wrapped with protective tape, disconnect the rod of the windshield wiper link assembly from the crank arm pivot of the windshield wiper motor assembly as shown in the illustration.





(b) Place matchmarks on the windshield wiper link assembly and crank arm assembly.





(c) Remove the nut and the crank arm assembly.

7. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

(a) Remove the 3 bolts and the windshield wiper motor assembly.