Fog/Driving Lamp Relay: Testing and Inspection

LIGHTING (EXT): RELAY: ON-VEHICLE INSPECTION

1. REMOVE HEADLIGHT RELAY (HEAD HI, HEAD LO)

(a) Remove the headlight relay from the engine room relay box.





2. INSPECT HEADLIGHT RELAY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the relay.

3. INSTALL HEADLIGHT RELAY

4. REMOVE FOG LIGHT RELAY

(a) Remove the fog light relay from the engine room relay box.





5. INSPECT FOG LIGHT RELAY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the relay.

6. INSTALL FOG LIGHT RELAY

7. REMOVE STOP LIGHT CONTROL RELAY ASSEMBLY

(a) Remove the No. 1 under cover Removal.

8. CHECK STOP LIGHT CONTROL RELAY ASSEMBLY

(a) Measure the voltage according to the value(s) in the table below.





Standard Voltage:





9. INSTALL STOP LIGHT CONTROL RELAY ASSEMBLY

(a) Install the No. 1 under cover Installation.