Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: CRAWL SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION Removal

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

4. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION Removal

5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Removal

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

9. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY Removal

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal

11. REMOVE SUSPENSION CONTROL SWITCH (CRAWL SWITCH)

(a) Disconnect the connector.

(b) Detach the 4 claws and remove the suspension control switch (CRAWL switch) from the upper console panel.