Removal

3UR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

3. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

4. REMOVE AIR CLEANER ASSEMBLY Removal

5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal

6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal

7. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

8. REMOVE FAN & GENERATOR V BELT Removal

9. REMOVE FRONT FENDER APRON SEAL FRONT RH Removal

10. DISCONNECT VANE PUMP ASSEMBLY Removal

11. DISCONNECT OIL COOLER PIPE ASSEMBLY Removal

12. REMOVE GENERATOR ASSEMBLY

(a) Disconnect the generator connector.





(b) Remove the terminal cap and nut, and disconnect the generator wire.

(c) Remove the bolt and wire harness bracket from the generator.

(d) Remove the 3 bolts, nut and generator.





(e) Remove the stud bolt.