Keyless Entry Transmitter Battery: Service and Repair

DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

1. REPLACE TRANSMITTER BATTERY

NOTICE:
Be careful when handling each component as they are precision electronic components.

(a) Using a screwdriver with its tip wrapped in protective tape, and turn the screwdriver to disengage the cover.





NOTICE:
Do not forcibly pry up the cover.

(b) Remove the battery (lithium battery: CR2032).





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery. The terminals may be damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter, it may interfere with the proper operation.

(c) Install a battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.





NOTICE:
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.

(d) Engage the cover securely.