Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

4. REMOVE LOWER NO. 2 STEERING WHEEL COVER Installation

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. REMOVE LOWER STEERING COLUMN COVER Removal

8. REMOVE UPPER STEERING COLUMN COVER Removal

9. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal

10. REMOVE STEERING ANGLE SENSOR





(a) Detach the 6 claws and remove the sensor.