Installation

1UR-FE BATTERY / CHARGING: GENERATOR: INSTALLATION

1. INSTALL GENERATOR ASSEMBLY

(a) Install the generator with the 3 bolts and nut.





Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

(b) Install the harness bracket to the generator with the bolt.





Torque : 31 Nm (316 kgf-cm, 23 ft-lbf)

(c) Connect the generator connector.

(d) Connect the generator wire with the nut.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(e) Install the terminal cap.

2. CONNECT VANE PUMP ASSEMBLY Installation

3. CONNECT SOLENOID VALVE CONNECTOR Installation

4. CONNECT POWER STEERING OIL PRESSURE SWITCH CONNECTOR Installation

5. INSTALL FRONT FENDER APRON SEAL RH Installation

6. INSTALL AIR CLEANER ASSEMBLY Installation

7. INSTALL FAN AND GENERATOR V BELT

(a) Install the fan and generator V belt Installation.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.