Operation CHARM: Car repair manuals for everyone.

Installation





3UR-FE LUBRICATION: ENGINE OIL COOLER: INSTALLATION

1. INSTALL OIL COOLER SPACER

(a) Apply a light coat of engine oil to a new gasket.





(b) Install the gasket to the oil cooler spacer.

(c) Install the oil cooler spacer to the oil filter bracket with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL OIL COOLER ASSEMBLY

(a) Apply a light coat of engine oil to 2 new O-rings.





(b) Install the 2 O-rings to the oil cooler.

(c) Install the oil cooler with the 5 nuts.





Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

3. INSTALL OIL FILTER BRACKET

(a) Apply a light coat of engine oil to 2 new O-rings.





(b) Install the 2 O-rings to the timing chain cover.

(c) Install the oil filter bracket with the 2 nuts and 2 bolts.





Torque : 35 Nm (357 kgf-cm, 26 ft-lbf)

4. INSTALL NO. 1 OIL COOLER BRACKET

(a) Connect the ground wire to the cylinder block.





(b) Install the oil cooler bracket with the 2 nuts.

Torque : 21 Nm (214 kgf-cm, 16 ft-lbf)

5. INSTALL WATER BY-PASS PIPE HOSE

(a) Connect the 4 hoses.





(b) Install the water by-pass hose with the 3 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

6. INSTALL COOLER COMPRESSOR ASSEMBLY Installation

7. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY Installation

8. INSTALL OIL FILTER ELEMENT

(a) Install the oil filter element Replacement.

9. INSTALL FAN & GENERATOR V BELT

(a) Install the fan and generator V belt Installation.

10. ADD ENGINE OIL Replacement

11. ADD ENGINE COOLANT Service and Repair

12. INSPECT FOR OIL LEAK Replacement

13. CHECK ENGINE OIL LEVEL Testing and Inspection

14. INSPECT FOR COOLANT LEAK Testing and Inspection