Removal

3UR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE NO. 1 ENGINE UNDER COVER Replacement

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE INLET RADIATOR HOSE Removal

6. DISCONNECT OUTLET RADIATOR HOSE Removal

7. REMOVE FAN SHROUD Removal

8. REMOVE FRONT FENDER APRON SEAL RH Removal

9. DISCONNECT VANE PUMP ASSEMBLY





(a) Disconnect the clamp and 2 power steering connectors.

(b) Remove the 2 bolts and disconnect the vane pump.





10. REMOVE GENERATOR ASSEMBLY

(a) Disconnect the generator connector.





(b) Remove the terminal cap and nut, and disconnect the generator wire.

(c) Remove the bolt and disconnect the wire harness bracket from the generator.

(d) Remove the 3 bolts, nut and generator.