Transmitter Battery (w/o Smart Key System)

DOOR LOCK: TRANSMITTER BATTERY (w/o Smart Key System): REPLACEMENT

1. REMOVE TRANSMITTER HOUSING COVER

(a) Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.





Text in Illustration





NOTICE:
Do not use excessive force when prying apart the housing cover.

2. REMOVE TRANSMITTER BATTERY

(a) Remove the battery (lithium battery).





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the battery (lithium battery). The terminals may be damaged.
* Do not touch the battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.

3. INSTALL TRANSMITTER BATTERY

(a) Install a battery (lithium battery) with the positive (+) side up, as shown in the illustration.





NOTICE:
* Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.

4. INSTALL TRANSMITTER HOUSING COVER

(a) Install the transmitter housing cover onto the transmitter housing case securely.