Slide Door Lock
DOOR LOCK: SLIDE DOOR LOCK: INSPECTION
1. INSPECT SLIDE DOOR HANDLE ASSEMBLY LH (w/o Power Slide Door)
(a) Apply battery voltage to the motor terminals and check the operation of the slide door handle.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
2. INSPECT SLIDE DOOR HANDLE ASSEMBLY LH (w/ Power Slide Door)
(a) Apply battery voltage to the motor terminals and check the operation of the slide door handle.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
(c) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
3. INSPECT SLIDE DOOR HANDLE ASSEMBLY LH (w/ Smart Key System)
(a) Apply battery voltage to the motor terminals and check the operation of the slide door handle.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
(c) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
4. INSPECT SLIDE DOOR HANDLE ASSEMBLY RH (w/o Power Slide Door)
(a) Apply battery voltage to the motor terminals and check the operation of the slide door handle.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
5. INSPECT SLIDE DOOR HANDLE ASSEMBLY RH (w/ Power Slide Door)
(a) Apply battery voltage to the motor terminals and check the operation of the door lock motor.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
(c) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
6. INSPECT SLIDE DOOR HANDLE ASSEMBLY RH (w/ Smart Key System)
(a) Apply battery voltage to the motor terminals and check the operation of the door lock motor.
Text in Illustration
OK:
If the result is not as specified, replace the slide door handle.
(b) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
(c) Measure the resistance according to the values in the table below.
Standard Resistance:
If the result is not as specified, replace the slide door handle.
7. INSPECT POWER SLIDE DOOR LOCK ASSEMBLY LH
(a) Check the operation of the slide door closer motor.
Text in Illustration
OK:
If the result is not as specified, replace the power slide door lock.
(b) Measure the resistance according to the values in the table below.
Text in Illustration
Standard Resistance:
Full Latch Switch
Half Latch Switch
Pawl Switch
(c) Measure the resistance according to the values in the table below.
Text in Illustration
Standard Resistance:
Neutral Position Switch (NPR)
Neutral Position Switch (NPC)
If the result is not as specified, replace the power slide door lock.
8. INSPECT POWER SLIDE DOOR LOCK ASSEMBLY RH
(a) Check the operation of the slide door closer motor.
Text in Illustration
OK:
If the result is not as specified, replace the power slide door lock.
(b) Measure the resistance according to the values in the table below.
Text in Illustration
Standard Resistance:
Full Latch Switch
Half Latch Switch
Pawl Switch
(c) Measure the resistance according to the values in the table below.
Text in Illustration
Standard Resistance:
Neutral Position Switch (NPR)
Neutral Position Switch (NPC)
If the result is not as specified, replace the power slide door lock.