Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: INSTALLATION

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. INSTALL OCCUPANT CLASSIFICATION ECU

(a) Install the occupant classification ECU with the claw.





NOTICE:
If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the occupant classification ECU with a new one.

(b) Connect the 2 connectors.

NOTICE:
When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with and is not pinched between other parts.

2. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat) Installation

3. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat) Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

Torque : 5.4 Nm (54 kgf-cm, 48 in-lbf)

5. ZERO POINT CALIBRATION AND SENSITIVITY CHECK

Programming and Relearning

6. INSPECT SRS WARNING LIGHT

Diagnosis System