Removal

2GR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT BUMPER ASSEMBLY

Removal

3. REMOVE RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR

Removal

4. REMOVE FAN & GENERATOR V BELT

Removal

5. REMOVE GENERATOR ASSEMBLY

(a) Turn back the terminal cap.





(b) Remove the nut and disconnect the wire harness from terminal B.

(c) Disconnect the generator connector from the generator assembly.

(d) Disconnect the magnetic clutch connector from the compressor and magnetic clutch.

(e) Disengage the 3 wire harness clamps.

(f) Remove the 2 bolts.





(g) Disconnect the wire harness clamp and remove the generator bracket.

(h) Remove the 2 bolts and the generator assembly.





(i) Remove the bolt and the wire harness clamp stay.