Removal
2GR-FE STARTING: STARTER: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
2. REMOVE AIR CLEANER INLET COVER ASSEMBLY SEAL Removal
3. REMOVE BATTERY Removal
4. REMOVE AIR CLEANER AND HOSE Removal
5. REMOVE STARTER ASSEMBLY
(a) Disconnect the starter connector.
(b) Open the terminal cap.
(c) Remove the nut and disconnect the terminal 30.
(d) Remove the 2 bolts and the starter assembly.