Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the RH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY Disassembly

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

4. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH Disassembly

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

6. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY (w/ Memory) Removal

7. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

8. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

HINT
Use the same procedure as for the LH side Removal.

9. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

HINT
Use the same procedure as for the LH side .

10. REMOVE FRONT DOOR CHECK ASSEMBLY Disassembly

11. REMOVE FRONT DOOR WEATHERSTRIP Disassembly

12. REMOVE FRONT DOOR GLASS RUN Disassembly

13. REMOVE FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY Disassembly

14. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

15. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY Disassembly

16. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" driver, remove the 3 screws and the power window regulator motor.