Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

NOTICE:
* When removing front seat assembly RH, perform zero point calibration and sensitivity check Programming and Relearning.
* When replacing the occupant classification ECU, perform zero point calibration and sensitivity check Programming and Relearning.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat) Removal

3. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat) Removal

4. REMOVE OCCUPANT CLASSIFICATION ECU

(a) Disconnect the 2 connectors.





(b) Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant classification ECU.

Text in Illustration