Installation

1AR-FE STARTING: STARTER: INSTALLATION

1. INSTALL STARTER ASSEMBLY

(a) Install the starter assembly with the 2 bolts.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(b) Connect the starter connector.

(c) Connect the terminal 30 with the nut.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(d) Close the terminal cap.

2. INSTALL AIR CLEANER ASSEMBLY Installation

3. INSTALL BATTERY Installation

4. INSTALL AIR CLEANER INLET ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization