Removal

1AR-FE STARTING: STARTER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE AIR CLEANER INLET ASSEMBLY Removal

3. REMOVE BATTERY Removal

4. REMOVE AIR CLEANER ASSEMBLY Removal

5. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Open the terminal cap.

(c) Remove the nut and disconnect the terminal 30.

(d) Remove the 2 bolts and the starter assembly.