Hazard Warning Switch: Testing and Inspection

LIGHTING (EXT): HAZARD WARNING SWITCH: INSPECTION

1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY





(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





If the result is not as specified, replace the hazard warning signal switch assembly.

(b) Check the operation hazard warning signal switch illuminates.

(1) Apply battery voltage to the hazard warning signal switch illuminates terminals.

OK:





If the result is not as specified, replace the hazard warning signal switch.